Hacona Heat Sealers

Flexible plastic film and bags such as PE, PP, PA, PVC and other thin laminate films can be sealed. PE film up to two layers of 200 microns can be sealed.

Due to the high temperatures of the sealing bar that is required, for safety, Hacona Heat Sealers are an eye-catching orange powder coated extruded aluminium for general use.

A silver-coloured anodised aluminium model is available for food- and pharma-related industries although it should be noted that the metal is not acid-proof.

The C-Type Sealers create a seal of 2.5mm.

The S-Type Sealers create a seal of 5mm.

Heat sealers are used to weld together two layers of thermoplastic. Thermoplastics are heat-reactive and tend to melt and seal at roughly 140 degrees Celsius which means a heat sealer must press together the two layers at this temperature to seal them properly.

All Hacona Heat Sealers work on the Impulse Sealing Principle. The sealing wire  will only get hot when the sealing bar is closed during the sealing process. After the sealing process, the temperature of the sealing wire will automatically diminish. This reduces the possibility of a Hacona Heat Sealer overheating.

This is determined by the thickness and type of material used, but often it takes less than two seconds to fully seal.

Hacona Heat Sealers use bar sealer technology. The sealing bar should be larger than the product being bagged. A complete seal will not be reached if the bar is shorter than the product.

The sealing wire of a Hacona Heat Sealer can reach high temperatures. In order to avoid danger to the operator and the machine, the following should not come in contact with a Hacona Heat Sealer: liquids, wet products and flammable materials. 

Yes. Box Depot has spare parts available for Hacona Heat Sealers. Please contact us at 01-4507272 to discuss your requirements.